IEC 60529 IPX9 High Pressure Hot Temperature Water Jetting Test Chamber

IEC 60529 IPX9 High Pressure Hot Temperature Water Jetting Test Chamber

  • Model:

IPX9 IPX9K High Pressure Hot Temperature Fan Jet Test Chamber HH0807


This equipment is used to inspect the IEC enclosures for the electrical equipment (IP supplementary code test), and it is applicable for waterproof testing of the electrical and auto parts under high temperature and high pressure.

Confirm to standards:

IEC 60529 IPX9K;

EN 60529 IPX9K;

ISO 20653-2006;


QC/T 417.1-200;


DIN40050-9 and so on.

Test sample: Products with IPX9 degrees waterproof test products, such as automobile and motorcycle parts, electrical and electronic industries.


The equipment is consists of heating water tank, high pressure plunger pump, high pressure solenoid valve, fan nozzle, turntable and so on. Firstly, heat the water in the water storage tank to required temperature, secondly, mount the sample on the turntable, adjust the position of the nozzle, thirdly, close the protective door of the test equipment, set all test required parameters, finally, start the test. The four nozzles spray for 30 seconds in order during the test.

Technical parameters:

Test Water Temperature80±5 ℃
Nozzle specificationIt is designed according to the standard figure
Nozzle number4 (0°, 30°, 60°, 90°)
Spray pressure8MPa-10MPa (adjustable)
Spray flow14l/min-16l/min (change according to pressure)
Spray distance100~150mm adjustable (The maximum side of the test product shall not exceed 450mm)
Sample support platformDiameter 400mm
Sample support platform rotate speed4-6r/min
Sample support platform bearing≤15kg
Sample support platform lift300mm~400mm (Manually)
Power supply for test sampleProvide interface for test product, 4 core wire power supply, the maximum 30A

IEC Test Equipment

IEC Test Equipment

IEC Test Equipment