Pneumatic Dropping And Motor Lifting Battery Drop Test Machine with PLC Touch Screen Control
Pneumatic Dropping And Motor Lifting Battery Drop Test Machine with PLC Touch Screen Control
- Model：
PLC Touch Screen Control Pneumatic Dropping And Motor Lifting Battery Drop Test Machine
Standard
IEC62133 clause 7.3.3 ,8.3.3 ,IEC60086-4 clause 6.5.4 ,IEC 60086-1, GB31241-2014 and etc .
Applications
This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone,electronic dictionary ,CD/MD/MP3 etc. and components free dropping testing. Specimen automatically lifting to pre-setting height, then free drop and shock on the drop plate.
Parameters
Drop Height | 300～1500mm(Controllable, steel ruler ,min.indication value :1mm) |
Testing Method |
Face, edge, corner dropping |
Test Loading | 0～5kg |
Specimen Max. Dimension |
W200 x D200 x H200mm |
Drop floor material |
A3steel plate (Acrylic plate,marble plate, wooden plate optional ) |
Drop floor dimension | W600 x D700 x H10mm(solid plate) |
Machine weight |
About 250kg |
Machine dimension |
W700 X D900 X H1800mm |
Machine Power |
0.75KW |
Drop method |
Pneumatic dropping |
Lifting method |
Motor lifting |
Power Source | 220V 50Hz |
Safety Device | With 500MM height rail |
Air Source | ＜1mpa |
Control Method |
PLC Touch Screen Control |
Features
This machine available for package face, corner, edge free drop testing
With height digital display instrument and tracing height with encoder, so can measure the precision drop height.
The drop height tolerance within2% or 10mm；
Adopt pneumatic structure, fix the specimen with special fixture (range adjustable), push the drop button, pneumatic cylinder open, specimen free dropping . The drop height controllable, and with height steel ruler which makes drop height available. Various kinds drop floor optional. Meets different testing standards
Notice
This machine control cabinet with 220V power, non professionals shall not open the cabinet and disassemble the components .
This machine used for material testing, prevent for people standing
The machine should be placed on flat floor, and keep machine dry and clean .
After finish testing, low down the arm, and cut off the power supply
Do not cut off power when testing .
