IEC60335-1 Automatic Cord Reels Endurance Tester Withdrawable Stroke Maximum 1000mm
IEC60335-1 Automatic Cord Reels Endurance Tester Withdrawable Stroke Maximum 1000mm
- Model:
IEC60335-1 Automatic Cord Reels Endurance Tester Withdrawable Stroke Maximum 1000mm
Appliance Tester Automatic Cord Reels Endurance Tester Withdrawable Stroke Maximum 1000mm
Standard
Clause 22.16 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements.
Application
It is used to check the automatic cord reels shall be constructed so that they do not cause
– undue abrasion or damage to the sheath of the flexible cord;
– breakage of conductor strands;
– undue wear of contacts.
Test sample
Automatic cord reels of household appliances and similar electrical appliances.
Feature
The device adopts a multi-functional fixture, large work surface, can test cord reels up to 300cm, test speed (5-30 times / min) is adjustable, and it is suitable for most test electrical products.
Parameters
Input Power | 220V/50HZ |
Gas Source | Compressed air 5 ~ 7kg / cm² |
Test Speed | 30 cycles / min (or at the maximum rate allowed by the construction of the cord reel if this is less) |
Test Cycles | 0~9999 times, the test device will stop working automatically when the preset test cycles are finished |
Drive Mode | Pneumatic |
Withdrawable Angle | 30~70°, can be preset |
Fixture | Quick clamping fixtures, easy for clamping the test sample |
Withdrawable Stroke | Maximum 1000mm, can be adjusted |