220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine
220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine
- Model：
220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine
Production introduction:
This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance.
The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.
Main technical parameters:
| Equipment | Markings durability tester |
| Test station | 1 station |
| Test stroke | 20mm |
| Test rate | 48rpm |
| Test times | 1~999999, default as 12times |
| Sliding weight | 500g. Strip weight 250g, with weight 750g |
| Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm |
| Power supply | 220VAC 50Hz |
| Standard | IEC 60730-1 Figure 8, Annex A |
Test Operation
Test Preparation: Insert the power supply ,turn on the power supply switch ,preset the test times as 12 times .
Select the corresponding weight to install the sample.
Press start button , the device reciprocates at a rate of 48 rpm and a stroke of 20mm ,it will be automatically stop when reaches the test times .The stop button lights and sound an alarm .
Presetting and parameters of instrument
