Products
UL817-2021 Power Cord Abrupt Pull Test Apparatus 6 Stations PLC Control
Products Description
UL817-2021 Power Cord Abrupt Pull Test Apparatus 6 Stations PLC Control
The test apparatus is designed and manufactured according to the requirements of UL817-2021 "Standard for safety: Cord Sets and Power-Supply Cords" 11.10.2, 11.10.3, 12.5, 18.2.4 and Figure 12.3 and Figure 12.4 and Figure 18.1.
Technical Parameters For Power Cord Abrupt Pull Tester:
Special plug fixture, switchable installation
1. The weight hook is directly hung on the crimping fixture (Figure 12.3); 2. The weight hook is directly hung on the sample cord (Figure 18.1)
0° and 45°
1. 1.1kg (2.5lb), the weight of the hook, tray and clamping fixture is 907±85g (2 lb±3)
2. 1.4kg (3lb)
3. 15 lbf (67N)
4. 4.5kg (10b)
Standars For Power Cord Abrupt Pull Tester:
Power supply
Match client's local power supply requirements
Use environment
Working temperature 0-40℃; Humidity 30%-90%
Equipment size
About 1000×600×1700 (mm) W×H×D
Equipment weight
220kg
Test station
6 stations, synchronous
Electrical control method
Mitsubishi PLC control, 7-inch touch screen operation
Drive mode
Electric
Specimen clamping method
Weight suspension
Clamp length
203mm
Sample tilt angle
Number of tests
0-999999 times, can be preset
Rotation angle
0°, ±90° or 360°
Spinning speed
0-360°/s
Impact height
178mm, 254mm, 610mm, can be set
Load weight
Load
0-12V,40A
Power on time
0-9999s can be preset, the default is 120s (2min)
Impact method
Solenoid release
