Products

Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless Steel Chamber
Products Description
                   Lithium Nickel-Cadmium Battery and Cell Charged Discharged Explosion Proof Stainless Steel Test Chamber 
   
 Overview: 
   
 This explosion proof testing chamber is used to prevent unnecessary explosion or burning damage to the test personnel during the battery overcharge and over discharge testing. The inner chamber is made of stainless steel with good texture and anti-explosion effect, the test chamber can be customized by customer’s requirements. 
   
 Standards Compliant: 
   
 It is conforming to standard of IEC62133-1/-2:2017 clause 7.1, 7.2.1, 7.3.8, 7.3.9, IEC62133-1/-2:2012 clause 8.2.1, 8.3.6, 8.3.7, IEC 60086-1, IEC60622, IEC60623, IEC61951, IEC61960, and so on. 
   
   
 Technical Parameters: 
   
 Main Components: 
   
   
              
 
Chamber Quantities 
2 or 4 or 8 optional (can be customized) 
 
Inner Chamber Size 
W500 X H500 X D500mm (can be customized) 
 
Inner chamber Material 
1.5mm stainless steel 
 
External Chamber Material 
Cold rolled steel with spray treatment 
 
Explosion-proof Glass 
Double 200X200 explosion proof glass, visible 
 
Chamber door 
Connected to the chamber by powerful hinge, with explosion proof lock 
 
Bottom 
One piece of marble slab to protect from battery external short circuit 
 
Top 
Equipped with a high brightness energy-saving lamps to illuminate the entire test space 
 
Venting fan 
A strong exhaust fan is installed in the back of the chamber 
 
Pressure relief door 
built in the back of each chamber. In the event of a battery explosion, the door will open and release pressure. 
 
Testing port 
Diamter:50mm cable port with stainless steel cover 
 
Control Panel 
Control the venting fan and lighting 
 
Inside 
2 power line with two insulated handle thread clamps inside the chamber, which is used to clamp the positive and negative pole of the battery 
 
Wheels 
Installed with universal wheel at the bottom of the chamber 
 
Power source 
AC 220V, 50Hz or AC110V, 60HZ ( can be customized) 
 
Name 
Specification 
Origin 
 
Protection box 
stainless steel inside, cold rolling SS outside 
KingPo 
 
Tempering glass 
220X220X10 
China 
 
Venting fan 
150X150 
China 
 
Button 
Made in China 
China 
 
Power switch 
Made in China 
China 



