Products
IEC60529 IPX8 Immersion Test Equipment For Electronic And Electrical Products
Products Description
IEC60529 High Quality IPX7 Immersion Test Chamber For Factory Inspection Use
Product information:
The high pressure water tank is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under continuous immersion in water at degree IPX8 as per IEC 60529:2013.
The water tank is made of stainless steel, the equipment is controlled by PLC, test parameters can be set on the touch screen directly, water supply and pressure are achieved automatically.
Technical Parameters:
Item
Specifications
Equipment power supply
Three phase AC380V 50Hz 4KW
Small water pump
Brand: South, model no.: CHL2-40, 380VAC, 50Hz, 0.55kw
Protection class: IP55 Insulation class: F
IP code test range
IPX8 test
IPX8 pressure tank
Diameter and height
φ600mm
Full height of the tank is 1500mm (From upper flange point to lower flange point is 1500 mm), the height of tank body is 1200mm
Pressure range
0.01~0.50Mpa
Tank material
SUS304 stainless steel
Pressurization method
Water pressure pressurization, the current pressure value is collected from the PLC from time to time, and the inverter controls the pump speed and frequency to pressurize, and the pressure is constant
Pressure sensor accuracy
0.5 grade
Limit pressure of safety valve protection
0.55 MPa
Pressure protection
a. mechanical protection: spring-type safety relief valve
b. program control: the pressure exceeds the upper limit value, the pump will stop working and immediately release the pressure
Cover opening method
Can be lifted by the screw rod and moved laterally, and can be fully opened for convenient sample placement
Control
PLC control
Test time
Set according to the test standard (range 1-9999 seconds), the unit is: second
Stair
Stainless steel stair
