Products
IEC 60598-1 Screwed Luminaires Lampholders Torque Test Apparatus 0-10N.m LCD Display
Products Description
IEC 60598-1 Screwed Luminaires Lampholders Torque Test Apparatus
Standards & Clauses:
IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4
Samples and Restrictions:
E10, E14and B15 (including candle type), E27, E26, B22, E40 lampholders
Application:
To test the influence of the rotational torque on the lampholders during the replacement of the light source.
Test Principle:
Adopt electronic torque sensor, the torque value can be measured and displayed in real time, operator manually rotates the light source, test torque is applied for 1 min in a clockwise and anti-clockwise direction, then check the displayed torque indication value on the LCD.
Structure:
Digital display, with a clamp for lampholders
Power Supply:
AC220V,50Hz
Technical Parameters:
Can be used to process torque test for lamp caps, test lampholders can be equipped, E27, E26, B22d, E14, E10, E40, B15 test lampholders are optional.
Torque Display
Digital display, torque range: 0-10N.m, with maximum torque hold function, upper limit alarm can be set
Lampholders Clamp
The lampholder is fixed with the clamp, operator directly rotates the opposite light source to measure the positive and negative torque of the lampholder
Extended Function
