Products
IEC 60598-1 IPX3~7 Waterproof Degree Test System Oscillating Tubes Test Immersion Chamber
Products Description
IEC 60598-1 IPX3~7 Waterproof Degree Test System Oscillating Tubes Test Immersion Chamber
Product Overview:
This IPX3~7 waterproof test system conforms to IEC 60529:2013, and required by IEC60335-1 clause 15, etc. This system includes following:
Oscillating Tubes: R400mm, R600mm, R800mm
Controlled by Control Cabinet on IPX7
Inner chamber size:
650mm*600mm*1500mm
Controlled by Control Cabinet on IPX7
φ600mm
Controlled by Control Cabinet on IPX7
Technical parameters:
1. Oscillating Tubes Test Apparatus
Water flow rate＞10L/min±5% clean water without inclusion.
This device is equipped with clean water filtration unit
Max. ±175° can be preset
(Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° cannot achieved during actual testing, if without turntable, then 360° can be achieved)
IPX3: 4s/time (2×120°);
IPX4: 12s/time (2×360°);
Dedicated IP waterproof test room, the ground should be flat with illumination
10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage. Ground installation
2. Integrated Immersion Chamber & Water Supply Tank & Control Cabinet
1. The smart water supply and control system is applicable to:
(a) Water supply for IPX3~IPX6 waterproof test
(b) IPX7 water immersion test
(c) Automatic control for the whole waterproof equipment
3. Water supply control process: After user preset the water temperature value, water flow value and water pressure value on the touch screen, the temperature control system, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. Water tempreture control: PID system automatically control and detect water tempreture, range: room temperature ~ 65℃ (±3℃).
5. There are large flow and small flow two ways water supply.
6. Large flow water supply:
(a) It is applicable to IPX5~IPX6 strong water spray test
(b) Flow range: 10~100L/min
(c) Flow accuracy: ±0.5L/min
(d) Flowmeter: turbine flowmeter
(e) Water pump: stainless steel centrifugal pump
7. Small flow water supply:
(a) It is applicable to IPX3~IPX4 waterproof test
(b) Flow range: 1~10L/min
(c) Flow accuracy: ±0.5L/min
Flowmeter: turbine flowmeter
(d) Water pump: stainless steel centrifugal pump
8. Water storage tank:
(a) It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX7 immersion
(b) Volume: Approx. 500L
(c) Dimension: W600mmXD650mmXH1500mm
(d) Observation window: toughened glass window
(e) Observation window dimension: W200mmXH1250mm
(f) Depth gauge: stainless steel
(g) Depth gauge height: 1200mm, accuracy1mm
(h) Liquid level control: float switch + overflow pipe
9. IPX7 immersion automatic lift bracket
(a) Lifting distance: 0~1200mm
(b) Bracket dimension: L400mmXW400mm
(c) Bracket load weight: 100Kg
10. Control Cabinet:
(a) Flow detection: flow signal feedback through electronic flowmeter
(b) Flow setting: set on touch screen
(c) Temperature detection: PID
(d) Controller: Mitsubishi PLC
(e) Friendly interface: 7 inch, color touch screen
(f) Control Function: constant temperature water supply, constant flow water supply, constant pressure water supply, and test time control.
(g) Protection function: leakage protection, overload protection, short circuit protection
12. Filter: stainless steel shell, fine filter core
13. Body material: industrial aluminum alloy
14. Outer dimension: 1400mmX750mmX1600mm
15. Power supply: Three phases AC 380V, 50Hz
3.Turntable & Nozzles Support
No.
Name
IP Code
Remark
1
Oscillating Tubes Test Apparatus
IPX3~4
2
Integrated Immersion Chamber for IPX7 & Water Supply Tank and Control Cabinet for IPX3~7
IPX7
3
Turntable & Nozzles Support
Accessory for IPX3~IPX6
No.
Item
parameters
1
Water supply
2
The size of the oscillating tube
Standard coming with R400mm, R600mm, R800mm oscillating tubes, made of stainless steel
3
Needle hole
Φ0.4mm
4
Included angle of two holes
IPX3:120°; IPX4:180°
5
Oscillating tube swing angle
6
Raining speed
7
Water flow
Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/min per hole)
8
Testing time
0.01S～99 hours 59mins,can be preset
9
Pressure gauge
0~0.25MPa
10
Site requirements
11
The area
According to the oscillating tube chose
Turntable diameter
Ø600mm
Turntable speed
1rpm
Tiltable angle
Can achieve 0° and 15°
Test angle of rotation
90° , continuous rotation
Body material
Industrial aluminum alloy
Dimensions (LxDxH)
800X800X250mm
Nozzles support
For fix the Ipx3/4 and IPX5/6 nozzles, please note that the nozzles are prepared by customer according to customer’s requirements.
Aluminum base with casters
Reversible control, rotational movement control by the control cabinet
