Products
IEC62196-1 EV Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus
Products Description
IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus
Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.
It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc.
Principle For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by releasing the torque weight by air cylinder.
Technical Parameters For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
One set of pull force weights
Can achieve 160N, 200N, 240N, 250N,500N, 600N
One set of torque weights
Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m
Operation Method
Button operation
Drive Mode
Motor and cylinder
Pull Force Weights
Torque Weights
Torque Arm
R100mm(Ф200mm)
Pull Frequency
1cycle/s
Pull Cycles
1-9999 cycles, can be preset, default 100 cycles
Torque Applied Time
0-99H59M59S, can be preset, default 1min
Fixture
One set of universal fixtures
Equipment Dimensions & Weight
W1300*D800*H1300mm, the whole machine is about 150Kg
Power Supply
Single phase AC220V±10%, 60Hz, 10A
