Products
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification
Products Description
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification
Standards & Clauses:
IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification”
IEC60529:2013 “Degrees of protection provided by enclosure (IP code)”
Samples and Restrictions:
Household appliances, electrical accessories, lamps, etc.
Application:
To verify
a)protection of persons against access to hazardous parts inside the enclosure；
b) protection of the equipment inside the enclosure against ingree of solid foreign object.
Test Principle:
The probes as per standard figures are used to distinguish the different protection levels of the electrical enclosure. After the current or force is applied to the probe, whether the probe can contact the live parts or internal parts, to determines whether the specimen is qualified or not.
Structure:
Nylon handle + steel probe.
Optional: wiring terminals for anti-electric shock test, or M6 threaded hole at the end of the handle for connecting with push-pull force gauge
Technical Parameters:
Description & application
mm
Forces to be applied
N
Probe & probe code
Figure No.
Access probe A
Fig. 1
Sphere: Ф50 with handle, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
50
Access probe B
Fig.2
Jointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
10
Access probe C
Fig.3
Rod: Ф2.5 - length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts
3
Access probe D
Fig.4
Wire: Ф1 - length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts
1
Object probe 1
Fig.5
Sphere: Ф50, to verify protection of equipment against ingress of solid foreign objects with diameter≥50mm
50
Object probe 2
Fig.6
Sphere: Ф12.5,to verify protection of equipment against ingress of solid foreign objects with diameter≥12.5mm
30
Test Probe 11
Fig.7
Unjointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
50
Test Probe 12
Fig.8
Cylinder pin: Ф4 - length 50,to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 13
Fig.9
Conical pin: Ф3 to Ф4 – length 15, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 14
Fig.10
Bar: 3×1, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
20
Test Probe 17
Fig.11
Wire: Ф0.5, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 18
Fig.12
Small finger probe: Ф8.6 - length 57.9,to verify protection of children over 36 months younger than 14 years old against access to hazardous parts or hazardous mechanical parts
10
Test Probe 19
Fig.13
Small finger probe: Ф5.6- length 44, to verify protection of children younger than 36 months against access to hazardous parts or hazardous mechanical parts
10
Test Probe 31
Fig.14
Cone: Ф110/60, to verify protection of persons against access to hazardous mechanical parts
50
Test Probe 32
Fig.15
Rod: Ф25, to verify protection of persons against access to hazardous mechanical parts
30
Test Probe 41
Fig.16
Probe: Ф30, to verify protection of persons against access to hot or glowing parts
Test Probe 43
Fig.17
Bar: 50×5, to verify protection of persons against access to hot or glowing parts
