Products
IEC 60335 Clause 7 Dual Station Label Marking Abrasion Test Apparatus
Products Description
IEC 60335 Dual Station Label Marking Abrasion Test Apparatus
Standards For Dual Station Label Marking Abrasion Test Apparatus:
This label marking abrasion test apparatus conforms to IEC 60335-1 clause 7.14, IEC 60065:2014 clause 5.1, IEC 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9.
Technical parameters For Dual Station Label Marking Abrasion Test Apparatus:
Maintenance Notes For Dual Station Label Marking Abrasion Test Apparatus:
1 The instrument must be placed on a stable surface before use.
2 It is not allowed to move the machine during use.
3 Select the appropriate power supply voltage, should not be too high, to avoid burning the instrument.
4 If the instrument works abnormal, please contact with us for timely processing.
5 The instrument must be used in a good ventilation environment.
6 Please add lubricating oil to the mechanical transmission part in time due to the large operating load of each component of the button mechanism.
7 After each test is completed, operator should clean the machine.
8 The control box part must be wiped with a dry cloth.
Troubleshooting For Dual Station Label Marking Abrasion Test Apparatus:
1 If the POWER is turned on, the instrument is not powered on or the power indicator is not light: if the power indicator is damaged, replace the indicator; if there is no power output at the power output terminal, please check the power cord or power socket-outlet.
2 If the power is turned on, the power indicator lights, but the machine does not work when operator presses the SWITCH button. Please check whether there is a disconnection. If there is a disconnection, please connect it in time. If there is no disconnection of the relay, indicating that the counter is damaged, the counter should be replaced in time.
3 When the number of times set on the counter is finished, but the motor does not stop working, indicating that the counter is damaged.
4 If the power indicator light is on but the counter has no display, it means that the counter is damaged and the counter needs to be replaced.
Configuration
Test stations
Two stations
Test stroke
10-60mm, adjustable(Manually adjustable)
Speed
5-60 times /min, adjustable
Counter
0-9999 adjustable
Weight
Two pieces of 10g, 20g,50g, 100g, 200g, 500g
Voltage
AC 220V, 50Hz
Machine size:
500*300*550mm
No.:
Name
Unit
Quantity
1
Main device
Label Marking Abrasion Test Apparatus
Set
1
2
Accessory
Petroleum spirit/ alcohol abrasion test fixtures
PCS
2
Rubber head abrasion test fixtures
PCS
2
Pencil abrasion test fixtures
PCS
2
Cotton cloth
Pack
1
Rubber head
PCS
2
Pencil
PCS
2
3
Document
User manual
Copy
1
Certificate of quality
Copy
1
Warranty card
Copy
1
