IEC Test Equipment , Clause 24 Measuring Non-Solid Pins Mechanical Strength Testing Machine

IEC Test Equipment , Clause 24 Measuring Non-Solid Pins Mechanical Strength Testing Machine

  • Model:

IEC60884 Clause 24 Measuring Non-Solid Pins Mechanical Strength Stainless Steel Testing Machine

 

Product information:The appliance is checked by the test of IEC60884-1clause 24, figure 14, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the axis of which is also perpendicular to the axis of the pin. During the application of the force, the reduction of the dimension of the pin at the point where the force is applied shall not exceed 0,15 mm. After removal of the rod, the dimensions of the pin shall not have changed by more than 0,06 mm in any direction.

 

Standard: IEC 60884-1 2013 clause 14.2 figure 14

 

Application: This device is use to test the mechanical strength of Pins of portable accessories.

 

Test sample: Non-solid pins

 

Feature: Apply a 100N force as per standard requirements with standard requirements.

 

Parameters:

 

Steel rodΦ4.8mm
Weight100N
Test standardIEC 60884-1 2013 clause 14.2 figure 14
Manual rotating the wheel so that the pin bearing pressure, time for 1min.

 

 

Picture for reference:

 IEC608841 Standard Scope:
This standard also applies to plugs which are a part of cord sets, to plugs and portable socket-outlets which are a part of cord extension sets and to plugs and socket-outlets which are a component of an appliance, unless otherwise stated in the standard for the relevant appliance.
Replace the penultimate paragraph and Note 4 by the following new paragraph and Note 4 and add new Note 5 as follows:
Plugs and socket-outlets complying with this standard should be suitable for use at ambient temperatures not normally exceeding +40 ℃, but their average over a period of 24 h does not exceed +35℃, with a lower limit of the ambient air temperature of -5℃.

 

About Us:

 

Guangzhou Hongce Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.