IEC 60884-1 Figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps

IEC 60884-1 Figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps

  • Model:

IEC 60884-1 figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps

 

Product Introduction

 

The plug cord flexibility test apparatus is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools).

 

The device can be preset test times (up to 999999), it can carry out the test and calculate of the numbers of tests automatically. When the test times reach to the preset value, the system will shut down automatically and completion signals sound. Once the test apparatus connects to external load, it can be used to process test with load.

 

Technical Parameters

 

Power SupplyAC220V, 60Hz (can customed by the customer)
Numbers of Test Stations6, With 6 Sets Of Clamps
Numbers of flexing times1-999999 (adjustable). With 6 independent counters corresponding to each station, and there is a general counter
Rate of Flexing10~60 rpm (adjustable)
Flexing AnglesSwivel angle on either side for 45°, 60°, 90°
Sample connecting wires6 PCS
Weights10N/20N*6(the weight of UL113g and 284g)
Breaking indicationIndicator display
DimensionsL*W*H=870mm *610mm* 820mm
Conforms to standardIEC884-1 Figure 21 and clause 23.4, IEC320-1, VDE0620

 

Mechanical theory

The crank block on the reduction gearbox is driven by the electric motor to do the reciprocating action.