IEC60245-1 Static Flexibility Tester For Checking Mechanical Strength Of Completed Flexible Cables
IEC60245-1 Static Flexibility Tester For Checking Mechanical Strength Of Completed Flexible Cables
- Model：
IEC60245-1 Static Flexibility Tester
Product Introduction:
This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.
Technical Parameters:
| A, B clamping head initial distance | 200mm |
| A and B, shall be located at a height above ground level | At least 1.5m |
| Sample length | 3±0.05m |
| The cable being turned in the clamp | 180° |
| Number of testing times | 2 |
Picture For Reference:
