Automated Needle Flame IEC Test Equipment IEC60695-11-5 Flammability Tester

Automated Needle Flame IEC Test Equipment IEC60695-11-5 Flammability Tester

Product information:

KingPo upgrades the previous needle flame tester to b e PLC control version one, the new PLC 7 inch automated needle flame test apparatus is much more humanized, and the operation is much easier.

This tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc..

Test Principle:

It consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with specific butane gas to ignite the specimen, then obeserve whether the specimen is ignited, the burning time and combustion length, thus to evaluate the dangerous of the small flame ignition which is caused by fault conditions inside the equipment.

Applications:

This test apparatus is suitable for the research, production and quality testing department of lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument, electrical connector, electrical and electronical equipment and other components. It is also suitable for insulating material, engineering plastics or other solid combustion material industry.

Model specification and technical parameters (Optional for non touch screen NF-1):

Model	NF-2
Control system	PLC
Display system	7" touch screen
Working voltage	220V/50Hz or 110V/60Hz
Timing device	9999X0.1S
Combustor dimentions	Inner boreφ0.5mm ± 0.1mm ,OD ≤φ0.9mm ,L ≥ 35mm
Combustor material	Stainless steel
Combustion angle	tilt 45°( testing ) or vertical ( when adjust the height of the flame)
Height of the flame	12±1mm adjustable(with flame height gauge)
Gas category	95% butagas ( can use the bottled lighter gas)
Range of temperature test	0~1000℃
Flame warming requirement	From 100°to 700°,time for standard values within 23.5S±1S
Temperature thermocouple	φ0.5 armour nickel-chromium/nickel aluminum wire K-Thermocouple
Work shop	0.5 cube,staunless steel case,black yogon background,(customizable0.75 cube,1cube)
Testing process	Test procedure automatic control,independent air draft
Volume size adjustment	Flowmeter adjustment
Conforms to standard	GB4706.1-2005,GB5169.5-2008,IEC60695-11-5,IEC60335-1

Includes:
A white Pine Test Board and five Sheets of Tissue Paper
A flame height gauge
Consumables:
White Pine Test Board and Tissue Paper
Thermocouple Type K and Copper Block

IEC Test Equipment