60 Times/min Soft Cable Retention Testing Apparatus Wire Crimping Test Device
The cable retention test device is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test cord retention and check the effectiveness of the retention of the cable and cord anchorage.
The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque equal to two-thirds of that specified in standard. After reassembly of the specimen, the component parts shall fit snugly and it shall not be possible to push the flexible cable into the specimen to any appreciable extent. The specimen is placed in the test apparatus so that the axis of the flexible cable is vertical where it enters the specimen.
The according tensile force of the flexible cable:
The rated current of the flexible cable(A)
The rated voltage of the flexible cable(V)
The tensile force
|Power Supply||220V 50Hz or 110V 60Hz|
|Test times||1~9999, adjustable. 100 is by default.|
|Test rate||60 times/min|
|Weight||10N*1, 60N*1, 20N*2|
|Standard||IEC60884Figure 20, VDE0620|