Media coverage

IEC 62368-1 TESTING AND MEASURING EQUIPMENT

2020-09-23 21:31:57 admin
IEC 62368-1 TESTING AND MEASURING EQUIPMENT
No.ItemsDescriptionPhotoQty


1Temperature and humidity chamberIEC62368-1-cl.4.1.4                 Model:KP-HWS1000L
1


2Test Apparatus for device forming
mains plug
IEC62368-1-cl.4.7                             Model :KP-LJ220
Technical Parameter:
1. As per IEC60065-fig11
2. Weight: 1N, 2N.
3. Socket:UK, EU.
4. Arm of force 0-320mm
5.mension: 350*150*150 mm

1


3Jointed test probe for equipment likely to be accessible to childrenIEC62368-1-cl.4.8                                  IEC 62368 -1-Figure V.1
1


4Unjointed test probeIEC62368-1-cl.4.8                IEC62368-Annex V.1.3 Test method 2
1


5Test hookIEC 62368-Figure 20
1


6Flat surfaceIEC62368-1-cl.4.8.4.6                             size:100 mm by 250 mm)
1


7Measuring network, touch current weighted for perception or reactionIEC 60990 figure 4  
1


8Measuring network, touch current weighted for let-goIEC 60990 figure 5
1


92kΩ resistor2kΩ±2%
1


10Jointed test probe for equipment not likely to be accessible to childrenTest probes V2
1


11Blunt probeTest probes V3
1


12Wedge probeTest probes V4
1


13Terminal probeTest probes V5
1


14Winding hot resistance testerIEC62368-1-cl.5.4.1.4,                              Model:RC3002                                                Measuring range:                                0.500~99.99Ω,±(-0.2% reading +5 D).                                            99.99~2000Ω±(-0.2% reading +2 D). 2000~10000Ω±(-0.2% reading +1 D).  Power supply:AC220V, 50/60Hz ,           Size:380(W)×340(D)×120(H)
1


15Pink Noise Generator Pink Noise according to IEC62368-1- Annex E http://www.batterytestingmachine.com/sale-10623142-pink-noise-generator-it-test-equipment-iec-60065-clause-4-2-and-4-3-and-iec-62368-1-annex-e.html                                                      
1


16Scratch test device with steel pinAnnex G 13.6.2 http://www.batterytestingmachine.com/sale-11991421-iec-60950-1-clause-2-10-8-4-automatic-abrasion-resistance-tester-printed-circuit-abrasion-strength-d.html
1


17Vicat test B 50 of ISO 306IEC62368-1-cl.5.4.1.10                   Dimension: 720mm×700mm×1380mm
Temperatrue: RT+10~300℃         Maximum temperature indication error :0.1℃                                                      Temperature indication precision: 
±0.5℃                                                Deformation measurement range: 
0—1.0mm                                                            
Resolution:0.01mm                                        Sample holder number: 3 sets      
Power: 4Kw
Power supply: 220VAC 50Hz

1


18Ball pressure test apparatusIEC62368-1-cl.5.4.1.10 http://www.batterytestingmachine.com/sale-11226669-iec-60695-10-2-2014-ball-pressure-tester-with-test-specimen-support-hot-deformation-capacity.html
1


19
circuit 1 of Table D.1._Impulse test generator

IEC62368-1-cl.5.4.2.3.2.5                         IEC 62368-1/Ed3-Figure D.1              Model:1950S

1


20circuit 3 of Table D.1._Impulse test generator  
IEC62368-1-cl.5.4.2.3.2.5                      IEC 62368-1/Ed3-Figure D.2 Model:KP-PRM65

1


21Tracking Index TesterIEC62368-1-cl.5.4.3                          Model:KP-FT02       
1


22Mandrel testIEC62368-1-cl.5.4.4.6.5                            IEC 62368-1- Figure 25-28                                                   Weight:100N*1,50N*1(  the pulling force of 50N, 100N, 150N can be achieved                                              Rotate angle:230°                                       Test mandrel:Triangle bar with a tip                                                      



23Electric Strength TestDielectric strength tester
Made accord to IEC 62368-1-Figure 29, IEC60065, UL1310 standards
Pole diameter: 5 ± 0.1mm
Metal club weight: 100 ± 2g

1


24Non-inductive Resistor 5000Ω and  Ampere meterIEC62368-1-cl.5.4.11
1


25Source with at least 1500A short circuit IEC62368-1-cl.5.6.4.1 (Annex R) http://www.batterytestingmachine.com/sale-12593671-250v-it-test-equipment-limited-short-circuit-test-iec-62368-1-annex-r.html
1


26Cheesecloth bleached cotton cloth 40g/m2IEC62368-1-cl.6.4.8.3.3
1


27Needle Flame TesterIEC62368-1-Annex S.2                                     Model:KP-FT03                                                                                                  
1


28Dark sticky mat, magnified glass with a resolution of 0,1 mmConform to  IEC 62368-1-cl.8.5.5.2.      
1


29magnified glass with a resolution of 0,1 mm                                                       Conform to  IEC 62368-1-cl.8.5.5.2.  Magnification:20x                            Resolution:0.1mm        
1


30circular plan surface φ30mmIEC62368-1-T.4 
1


31Flat surface  IEC 62368-1-cl.8.6.2.3.                                 flat surface 12.5cm by 20cm
1


32800N=330N(item 1 can be used) +100N(item 3 can be used)+150N+200N+flat surface (20N)1


33Inclined plane 10°  IEC 62368-1-cl.8.6.4.                                   1, Tilt angle :0-30 °equipped with angle measuring instrument calibration, easy to operate, high accuracy angle, precision ± 0.5 °                                                        2, The maximum weight load: 50kg                                                                      3, Table size: 1000*1000mm.                                                                       
4.Glass Thickness:10mm        

1


3475mm  width strapConform to  IEC 62368-1-cl.8.8
1


35circular plan surface φ30mmIEC62368-1-cl.8.10.3
1


36Steel disk
IEC 62368-1-cl.9.6.3                    IEC CDV 62368-1/Ed3-Figure 47(including thermocouples)

1


37Aluminium ring
IEC 62368-1-cl.9.6.3                 IEC CDV 62368-1/Ed3-Figure 48(including thermocouples)

1


38Aluminium foil
IEC 62368-1-cl.9.6.3                 IEC CDV 62368-1/Ed3-Figure 49(including thermocouples)

1


39Covering of ventilation
openings

IEC 62368-Annex B.3.2                                    piece of card with minimum 200 g/m² density

1


40Wrapping Tissue12g/ m2 – 30g/m2
1


41   Cord Pull testIEC 62368-AnnexG.7.3.2.11,                  Power Supply: AC220V 50HZ;
2, Pull weight: 20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved);
3, Torque weight: 5N*1, 12.5N*1, 17.5N*1 (0.1Nm,0.25Nm,0.35Nm);
4, Tension times: 0~9999(selectable),25 times is by default;
5, Tension frequency: 1 times/s;
6, Torque time: 0.01S~99 hours 99 mins;

1


42 impact testIEC 62368-Annex T.6                        φ50mm/500g± 25g steel ball,
1


43Drop testIEC 62368-Annex T.7                                Hard wood 13mm on 18mm ± 2mm plywood, two layers
1


44Centre punch  for Fragmentation testIEC 62368-Annex T.10                       1.Weight: 75 g ± 5 g
2.  Material: conical tungsten
3.  Feature: a carbide tip with an angle of  (60 ± 2)° 

1


45Vicat softening test apparatus                   
Dimension: 720mm×700mm×1380mm
Temperatrue: RT+10~300℃         Maximum temperature indication error :0.1℃                                                      Temperature indication precision: 
±0.5℃                                                Deformation measurement range: 
0—1.0mm                                                            
Resolution:0.01mm                                        Sample holder number: 3 sets      
Power: 4Kw
Power supply: 220VAC 50Hz

1